PRODUCT CENTER
7075 T6 colored aluminum plate
7075 T6 colored aluminum plate has the advantages of easy processing and molding, as well as good coloring and weldability of organic polymer coating materials. The products produced have good practicality, processability, durability, and other characteristics.
SEE MORE
7075 T6 aluminum tube belongs to Al-Zn-Mg-Cu superhard aluminum, 7075 alloy has been applied to the aircraft manufacturing industry in the late 1940s, and is still widely used in the aviation industry of ultra-high strength deformation aluminum alloy. It is characterized by good plasticity after solid solution treatment, particularly good heat treatment strengthening effect, high strength below 150℃, and particularly good low temperature strength; Poor welding performance; Prone to stress corrosion cracking; Need to be coated with aluminum or other protective treatment. Two-stage aging can improve the resistance to stress corrosion cracking. Zinc is the main alloying element in 7075, and adding magnesium to the alloy containing 3%-7.5% zinc can form MgZn2 with significant strengthening effect, so that the heat treatment effect of the alloy is far better than that of the aluminum-zinc binary alloy. With the increase of zinc and magnesium content in the alloy, the tensile strength will be further improved, but the resistance to stress corrosion and spalling corrosion will be decreased. Very high strength properties can be achieved by heat treatment. 7075 materials are generally added to a small amount of copper, chromium and other alloys, the series of 7075-T651 aluminum alloy is particularly high-quality, known as the best aluminum alloy products, high strength, far better than any soft steel.
SEE MORE
6063 T651 Aluminum plate is characterized by moderate strength, good plasticity and excellent corrosion resistance. In particular, it has no stress corrosion cracking tendency, excellent weldability, corrosion resistance and cold workability, and it is a wide range of alloys.
SEE MORE
5056 H24 Patterned aluminum plate
5056 H24 Patterned aluminum plate is an Al-Mg series anti-rust aluminum alloy, which cannot be strengthened by heat treatment. The chemical composition of the alloy is basically similar to that of 5B05 alloy except that the content of manganese is low, and the content of magnesium is slightly higher than that of 5A05 alloy. The properties of this alloy are basically similar to those of 5B05. The alloy has good plasticity in annealed state, good corrosion resistance and acceptable weldability.
SEE MORE
7075 T4 aluminum capillary tube
7075 T4 Aluminum capillary tube Aluminum and aluminum alloy capillary tubes generally refer to pure aluminum tubes, alloy aluminum tubes, and other special aluminum tubes with an outer diameter of 0.5mm~10mm and an inner diameter of 0.3mm~9.8mm.
SEE MORE
