PRODUCT CENTER
6063 T4 round aluminum bar has excellent processing properties, excellent availability and excellent positive oxidation effect
① 6063 aluminum alloy material. The main alloying elements are magnesium and silicon, with processing, excellent availability, extrusion and electroplating properties, good corrosion resistance, toughness, easy polishing, color film, positive oxidation effect is excellent, is a typical extrusion alloy. 6063 aluminum alloy profiles with its good plasticity, moderate heat treatment strength, good performance and after oxidation treatment, the surface gorgeous color and many other advantages are widely used in building profiles, irrigation pipes, for vehicles, benches, furniture, lifts, fences and other pipes, rods, profiles.
②6063 is a low alloyed Al-Mg-Si high plastic alloy. It has many valuable characteristics: 1. Heat treatment strengthening, high impact toughness to the gap. 2. Excellent performance and corrosion resistance, no stress corrosion cracking tendency, in the heat treatment can strengthen the aluminum alloy, Al-Mg-Si alloy is not found stress corrosion cracking phenomenon of the alloy. 3. The surface after processing is very smooth, and easy to Yang oxidation and coloring.
SEE MORE
6061 T6 round aluminum bar is a heat-treatable alloy with good formability, machinability, and moderate strength, which can still maintain good operability after annealing.
The main alloying elements of 6061 alloy are magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the influence of titanium and iron on electrical conductivity; Zirconium or titanium can refine grain and control recrystallization structure; For machinability, lead and bismuth can be added. Mg2Si is soluble in aluminum, so that the alloy has the function of artificial age hardening.
SEE MORE
6061 T4 is a heat-treatable alloy with good formability, machinability, and moderate strength, which can still maintain good operability after annealing.
The main alloying elements of 6061 alloy are magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the influence of titanium and iron on electrical conductivity; Zirconium or titanium can refine grain and control recrystallization structure; For machinability, lead and bismuth can be added. Mg2Si is soluble in aluminum, so that the alloy has the function of artificial age hardening.
SEE MORE
5083 H32 round aluminum bar belongs to the Al-Mg-Si series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. The main alloying element of 5083 is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and rivets, Hardware products, electrical casings, etc.
SEE MORE
5056 H16 round aluminum bar is an Al-Mg series anti-rust aluminum alloy, which cannot be strengthened by heat treatment. The chemical composition of the alloy is basically similar to that of 5B05 alloy except that the content of manganese is low, and the content of magnesium is slightly higher than that of 5A05 alloy. The properties of this alloy are basically similar to those of 5B05. The alloy has good plasticity in annealed state, good corrosion resistance and acceptable weldability.
SEE MORE
