Home page

3105 H18 Alumina coil

3105 H18 Alumina coil Alumina Coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.

Classification ：

Aluminium coil

+8617351520351

ruihongjin@rhjaluminum.com

E-mail

Product introduction

3105 H18 Alumina Coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.
Anodized aluminum oxide rolls are widely used in industries such as mechanical components, aircraft and automotive components, precision instruments and radio equipment, building decoration, casings, lighting fixtures, electronic consumer goods, handicrafts, household appliances, interior decoration, signage, furniture, automotive decoration, etc.
(1) Good processability: Positive grade aluminum oxide sheet has strong decorative properties, moderate hardness, and can be easily bent and formed for continuous high-speed stamping, making it easy to directly process into products without complex surface treatment, greatly shortening the product production cycle and reducing production costs.
(2) Good weather resistance: standard thickness of oxide film (3 μ m) Anodized aluminum plates used indoors will not discolor, corrode, oxidize, or rust for a long time. Thickened oxide film (10 μ m) Anodized aluminum plates can be used outdoors and will not change color after prolonged exposure to sunlight.
(3) Strong metallic feeling: Anodized aluminum plate has a high surface hardness of gemstone grade, good scratch resistance, no paint coverage on the surface, retains the metallic color of the aluminum plate, highlights the modern metallic feeling, improves the product grade and added value.
(4) High fire resistance: Pure metal products, free from paint or any chemical substances on the surface, do not burn at high temperatures of 600 degrees Celsius, do not produce toxic gases, and meet fire and environmental requirements.
(5) Strong stain resistance: no fingerprints, stains, easy to clean, and no corrosion spots.
(6) Strong applicability: widely used, suitable for metal aluminum ceilings, curtain wall panels, aluminum plastic panels, fire-resistant panels, honeycomb aluminum panels, aluminum veneers, electrical panels, cabinet panels, furniture panels, etc.

It has high strength, light weight, good anti-seismic performance of waterproof agent and good skin stiffness. Reduce installation, construction installation is convenient, shorten the construction period, less transportation workload.

3105 Chemical element content (%)

Element	Al	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg
minimum value	95.85	-	-	0.3	-	-	-	-	0.2
maximum value	99.5	0.7	0.6	0.8	0.2	0.3	0.1	0.4	0.8

Data presentation

Thickness	0.1mm~16mm or according to customer' s requirement	Length:	100-12000mm，or as required
Width	600mm-1250mm, according to customer' s requirement	Standard:	ASTM，AISI，JIS，GB， DIN，EN
Certification:	ISO, SGS，BV
Surface finish	mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc
Grade	1000 Series: 1050 1060 1070 1100 1200 1235 etc.
	3000 Series: 3003 3004 3005 3104 3105 3A21 etc.
	5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc.
	6000 Series: 6061 6063 6082 6A02 etc.
	7000 Series: 7050 7475 7075 etc.
Temper	H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321.
Payment Terms	T/T, L/C ,West Union	Loading port	any port in China
Packing	standard export packing
Container size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
	40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
	40ft HC:12032mm(Length)x2352mm(Width)x2701mm(High)

Warehouse storage

In order to meet the needs of customers "small batch, multi-specification, to spot" (the minimum order quantity of a single specification is 1 ton), we have been committed to 1-8 series aluminum sheet aluminum sheet, aluminum coil, aluminum foil, aluminum tube and other aluminum products R & D, production and sales. Annual inventory of more than 3,000 tons, complete brand specifications, truly meet customers "one-stop" procurement.

Packaging and shipping

In today's fast-developing information age, with a strong logistics system, we realize the three fast advantages of "fast response, fast shipment, fast logistics", and a professional marketing team, so that global customers in the pre-sale, sale, and after-sales process.

Application area

Aerospace, transportation, packaging, electronic home appliances, printing, building decoration aluminum and other 6 series of pillar products. The company covers aluminum product development and research, design and production, sawing, punching, milling and other deep processing. Mold making workshop, aluminum extrusion workshop, oxidation workshop one-stop production, quality won the trust of users, adhering to the "customer first, quality first".

Timely response

Source manufacturers, 0 links direct supply, 3 module production lines, daily output of 80,000, sufficient production capacity fast delivery. Stable and sustainable production, ensure quality and production efficiency.

The service team provides customers with new specifications supporting the use of the plan to answer questions, a full range of sample delivery services, use experience, timely return visits, so that customers have no worries. Contact information on the right, come and get the free quotation！

Customer visit

We warmly welcome new and old customers from home and abroad to visit and negotiate!

HONOR CERTIFICATE

No data

FACTORY ENVIRONMENT

Factory

Aluminium coil